SYNTEC CNC Application manual - Winter Holztechnik

SYNTEC CNC application manualItem Code Name、range DescriptionR589R590~R599Multiple Axis Group MSTassociated informationPLCHINT PLC warning messagePLC warning message ,each BIT stand for onewarning , there are 32warning for one register.Totally there are 320warning message can bedefined.R590.0 empty warningmessageR590.1 for 1 st warningmessageR590.2 for 2 nd warningmessageR590.31 for 31 ed warningmessageR591.0 for 32 ed warningmessagetapping modeBit 1 S29/S54/S69 is executedby M/S/T code in 1 staxis group program($1)Bit2 S29/S54/S69 is executedby M/S/T code in 2 ndaxis group program($2)Bit 3 S29/S54/S69 is executedby M/S/T code in 3 thaxis group program($3)Bit4 S29/S54/S69 is executedby M/S/T code in 4 thaxis group program($4)PLC warning message area,eachbit represent one warning,thereare 32 warning for one register.Totally there are 320 warningmessage can be used。R590.0 empty warning messageR590.1 for 1 st warning messageR590.2 for 2 nd warning message..R590.31 for 31 ed warningmessageR591.0 for 32 ed warning message..R592.0 for 64 ed warning message..R593.0 for 96 ed warning message..warning message is defined fromCharacter string list 23001,inanother words 23001 mapping tothe 1 st contents of hint, 23002mapping to the 2 ndhint,follow the rule。R600 MLOCK Machine lock Machine lock。Bit 0 not usedBit 1 for 1 st axis (X) lockBit 2 for 2 nd axis (Y) lockBit 3 for 3 rd axis (Z) lockBit 4 for 4 ed axis lock…contents ofR601 AXMPGS Axis MPG simulation Under PLC axis program,whenmapping to 1,the speed of thatPLC axis when processing isaccording to MPG’s rollingspeed,roll faster ,the machinePLCR/WW68