SYNTEC CNC Application manual - Winter Holztechnik

CNC communiction interface definitionItem Code Name、range DescriptionSYNTEC CNC application manualR0R1 MCODE M Code (00~99) When CNC doing M CODE ,will put the contents of M CODEin here, let LADDER to read.R2 SCODE S Code (0000~9999) When CNC doing S CODE ,will put the contents of S CODEin here, let LADDER to read.R3 TCODE T Code (0000~9999) When CNC doing T CODE ,will put the contents of T CODEin here, let LADDER to read.R6 MPGPOS1 MPG 1 Position First MPG position RR7 MPGPOS2 MPG 2 Position Second MPG position RR8 MPGPOS3 MPG 3 Position Third MPG position RR13® MODE Mode selection1: Edit, 2: Auto, 3: MDI, 4:JOG, 5:INCJOG, 6: MPG,7: HOMER14 INCF Increment FeedINCJOG: 1: x1, 2: x10, 3:x100, 4: x1000MPG: 1: x1, 2: x10, 3:x100, 4: x set by theparameter NO.2001R15 SPOV Spindle Override1: 50%, 2: 60%, 3: 70%, 4:80%, 5: 90%,6: 100%, 7: 110%, 8:120%R16 FOV Feedrate Override1: 10%, 2: 20%, …..., 20:200%R17 JOV JOG Override1: 10%, 2: 20%, …..., 20:200%R18 RTOV Rapid Traverse Override1: F0, 2: 25%, 3: 50%, 4:100%Process mode select , use theREGISTER to tell CNCThe select of MPG segmentcount ,and setup of inch movesegment countAUTO MODE ,JOG MODE arevalidG01,G02,G03 segment countsetupJOG segment count setupG00 segment count setup , whenJOG click fast key ,the speed ofmachine is as same as thisspeed ,when REGISTER set to1 ,the machine will use F0speed moved ,this F0 speed canbe set by parameterR21 Active Session ID WPLCR/WRRRWWWWWWR22 MPG2OV MPG: 1: x1, 2: x10, 3:x100, 4: x100R23 MPG3OV MPG: 1: x1, 2: x10, 3:x100, 4: x10061Second MPG segment countselectThird MPG segment count selectWW