SYNTEC CNC Application manual - Winter Holztechnik

SYNTEC CNC application manualItem Code Name、range DescriptionPLCR/W~R1023 Reserved for CNC Reserved for systemR1024~R4095APP User define User define R/W3.5 system ALARM codeprogram execute error check,COR001 Array index can’t be floating point or empty002 Variable is not initial when using003 Error when dividing 0004 Error in operation area005 Could not find the program006 Arc is not on the working plane007 Radius of arc is too short008 The end of arc is not on the arc009 Mraco call too deep arrangement of ideas010 Fixed mode mraco call too deep arrangement of ideas011 Sub-program call too deep arrangement of ideas012 Too many cancel command of module,G67013 In G code string ,G65,G66 must be the last one014 No program number015 Too many M codes016 Illegal variable access017 Could not find the table018 Could not find the line019 No program leave point, M02/M03, or M99020 Too many G codes021 Too many IJK parameter022 No define working plane coordinates023 Meaning error024 Arc radius error025 Processing shape to much rough and uneven026 System program error027 Marco send the alarm028 System program error029 Change tool compensation in arc031 Cancel radius compensation in arc032 Start radius compensation in arc033 Not suit ,A,R or,C command034 Command and meaning get a conflict035 Corner too small ,can not inster corner around or chamfer036 Not suit ,A point of view command76