CCTNS nagaland_SI_RFP_Volume 1.pdf - National Crime Records ...

Crime & Criminals Tracking Network and Systems ProjectNagaland PoliceSlNo Specification Complied (Y/N)6 The base tube shall be provided with adjustableshoes 2 nos. on each side.7 Painting: Complete frame of tubes shall bepowder coated.Printer Table (Size: L 610 x W 610 x H 660 mm )Value Add (Ifany)/ Remarks1234567891011Shelves : 3 no. made of 18mm thick prelaminated Medium Density Fiber Board(MDF)ISI marked (IS 14587 – 1998)Top shelve size 610x610 mm for placingprinting unit.Middle Shelve size 460x330 mm for placingfeet on stationary.Bottom shelve size 460x380 mm for collectingprint out.The top faces of the shelve shall be naturalteak wood shade.The bottom faces shall be in plain white/creamshades.Structure: The structure shall be made fromsquare and rectangular steel tubes duly weldedfinished and powder coated.The horizontal tube 25x25x1 mm thick 330 mlong shall be welded over vertical tubes 25 mmoff the center width /depth wise.Panels made of 18 mm pre laminated particleboard shall be screwed rigidly between verticaltubes on both sides.Two nos. bottom support tubes 50x25x1.25mmthick shall also be provided with two nos. ofadjustment shoes.A rectangular slot of size 455x25 mm shall beprovided on top shelve along with length forfeeding stationary as shown in figure. A slotshall be covered with PVC insertion for safelyof paper.12 The ends of bottom and top shall be pluggedwith PVC/ plastic caps.Painting: Complete steel structure shall be13 pretreated and powder coated with minimumthickness of 60 microns coating.Computer Chair with Handle12Seat size shall be 430x430 mm on 10 mm.thick molded comm. ply with 60 mm thick 40density molded PU foamBack rest size shall be 400x300 mm on 10 mmthick molded comm. ply with 40 mm thick 32density molded PU foam covered with tapestry.Volume I Request for Proposal for Selection of System Integrator Page 192 of 193