HX2 Reference Guide - Delfi

OptionsOptionFunctionThis option is Disabled (unchecked) by default.Clear Pairing Table on BootAuto Reconnect on BootWhen enabled (checked), all previous paired information is deleted upon any reboot sequenceand no devices are reconnected.When enabled (checked) "Auto Reconnect on Boot" is automatically disabled (dimmed).This option is Enabled (checked) by default. All previously paired devices are reconnectedupon any reboot sequence.When disabled (unchecked), no devices are reconnected upon any reboot sequence.This option is Enabled (checked) by default. This option controls the overall mobile Bluetoothdevice reconnect behavior.Auto Reconnect• When Auto Reconnect is disabled (unchecked), Auto Reconnect on Boot is automaticallydisabled and dimmed.• When Auto Reconnect is disabled (unchecked), no devices are reconnected in any situation.The status of Auto Reconnect on Boot is ignored and no devices are reconnectedon boot. The status of Clear Pairing Table on Boot controls whether the pairingtable is populated on boot.• When Auto Reconnect is enabled (checked) and Auto Reconnect on Boot is disabled(unchecked), devices are not reconnected on boot, but are reconnected in other situations(example: return from out-of-range).• When Auto Reconnect is enabled (checked) and Clear Pairing Table on Boot is enabled(checked), devices are not reconnected on boot, but are reconnected in other situations(example: return from out-of-range). The pairing table is cleared on boot. The status ofAuto Reconnect on Boot is ignored and the option is automatically disabled (unchecked)and dimmed.E-EQ-HX2RG-M [ 91 ] HX2 Reference Guide