Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Configuring the <strong>HX2</strong> with LXEConnectConfiguring the <strong>HX2</strong> with LXEConnectLXEConnect allows a user to view the <strong>HX2</strong> screen remotely from a PC using an ActiveSync connection:Requirement : ActiveSync (version 4.5 or higher for Windows 2000/XP desktop/laptop computers) must be resident on thehost (desktop/laptop) computer. Windows Mobile Device Center is required for a Windows Vista/Windows 7desktop/laptop computer. ActiveSync and Windows Mobile Device Center for the PC are available from the Microsoft website.Follow their instructions to locate, download and install ActiveSync or Windows Mobile Device Center on your desktopcomputer.Note: For readability in this section, ActiveSync will be used in instructions and explanations. If you have a WindowsVista or Windows 7 operating system on your desktop/laptop, replace ActiveSync with Windows Mobile Device Center.ActiveSync is already installed on the <strong>HX2</strong>. The <strong>HX2</strong> is preconfigured to establish a USB ActiveSync connection to a PCwhen the proper cable is attached to the <strong>HX2</strong> and the PC.If the <strong>HX2</strong> uses a serial port for ActiveSync, it will be necessary to configure the <strong>HX2</strong> to use the serial port. Complete detailson the proper cables and port configuration are included in Initial Setup.Install LXEConnect1. Install Microsoft ActiveSync on a PC with a USB port. For details, please see Initial Setup.2. Power up the <strong>HX2</strong>.3. Connect the <strong>HX2</strong> to the PC using the proper connection cable. Once connected, the ActiveSync dialog box appears. Ifusing the USB connection, the ActiveSync connection is automatically established. If using a serial connection, it isnecessary to initiate the connection from the <strong>HX2</strong>.4. Select “No” for partnership when prompted. Dismiss any ActiveSync dialog boxes warning a partnership is not set up. Itis not necessary to establish a partnership to use LXEConnect. However, if a partnership is desired for other reasons,one may be established now. More details on partnerships are included in ActiveSync Help.5. When the ActiveSync screen appears, select Explore.ActiveSync Explore6. An explorer window is displayed for the <strong>HX2</strong>. Browse to the \System\LXEConnect folder. If this folder is not present,contact your LXE representative for the necessary files.E-EQ-<strong>HX2</strong>RG-M [ 55 ] <strong>HX2</strong> <strong>Reference</strong> <strong>Guide</strong>
Change language