HX2 Reference Guide - Delfi

Wireless Network Configuration for LXE DevicesThe Summit client device is either an 802.11g radio, capable of both 802.11b and 802.11g data rates or an 802.11a radio,capable of 802.11a, 802.11b and 802.11g data rates.The radio can be configured for no encryption, WEP encryption or WPAsecurity.Security Options Supported are• None• WEP• LEAP• WPA-PSK• WPA/LEAP• PEAP-MSCHAP• PEAP-GTC• EAP-TLS• EAP-FASTImportant NotesIt is important that all dates are correct on the HX2 and host computers when using any type of certificate. Certificatesare date sensitive and if the date is not correct authentication will fail.Verify and adjust the date using the Date and Time control panel.It may be necessary to upgrade radio software in order to use certain Summit Client Utility (SCU) features.Contact your LXE representative for details.When using the 802.11a radio, the U-NII 1 band is the preferred band for indoor operation. For regulatory domainsin which the U-NII 3 band is allowed, the following channels are supported: 149, 157 and 161. The AP must beconfigured accordingly.After making any changes to the wireless configuration, warmboot the HX2.E-EQ-HX2RG-M [ 195 ] HX2 Reference Guide