HX2 Reference Guide - Delfi

ExitExitThe Exit option is password protected. The default password is leave. The password is not case-sensitive.Exit PasswordIf changes were made on the HX2 Startup/Shutdown tab screen, then after entering the password, tap OK and the followingscreen is displayed:Continue or Stop MonitoringChange the option if desired. Tap the X button to cancel Exit. Tap the OK button to exit the Avalanche applet.Using Remote Management1. Configure the radio to connect to the network running the Mobile Device Server. After the HX2 is connected, proceed tostep 2.2. If it is desired to configure the radio using the Summit package, add the configured package to the Wavelink AvalancheMC Console and enable it.3. Verify RMU.CE.CAB exists in the \System\RMU folder.4. Double click the HX2 enabler CAB file in the \System folder.5. The enabler automatically launches after installation and contacts the Mobile Device Server. The Avalanche MC Consoleconnected to that Mobile Device Server identifies the remote device and performs a sync. This downloads anyavailable packages available for the HX2.E-EQ-HX2RG-M [ 191 ] HX2 Reference Guide