HX2 Reference Guide - Delfi

Auto ProfileOnce logged in, the button label changes to Admin Logout. To logout, either tap the Admin Logout button or exit the SCUwithout tapping the Admin Logout button.Auto ProfileAuto Profile allows the user to configure a list of profiles that the SCU can search when a radio connection is lost. After usingthe Profile tab to create any desired profiles, return to the Main tab. To specify which profiles are to be included in Auto Profile,click the List button.Select Profiles for Auto ProfileThe Auto Profile selection screen displays all currently configured profiles. Click on the checkbox for any profiles that are to beincluded in Auto Profile selection then click ok to save.To enable Auto Profile, click the On button on the Main tab.When Auto Profile is On, if the radio goes out of range from the currently selected profile, the radio then begins to attempt toconnect to the profiles listed under Auto Profile.The search continues until:• the SCU connects to and, if necessary, authenticates with, one of the specified profiles or• the Off button is clicked to turn off Auto Profile.Note: Do not include any profiles with an Ad Hoc Radio Mode in this listing.E-EQ-HX2RG-M [ 200 ] HX2 Reference Guide