HX2 Reference Guide - Delfi

Enabler Installation and ConfigurationEnabler Installation and ConfigurationIntroductionThis section discusses LXE supported features with Wavelink Avalanche Mobile Device Servers. This section is split intothree basic areas:• Installation• User Interface• Enabler ConfigurationInstallationTo use the Wavelink Avalanche MC System, the following items are required:• A desktop or laptop PC on which to install the Avalanche MC Console.• A desktop or laptop PC on which to install the Avalanche Mobile Device Server (this can be the same PC where the AvalancheMC Console is installed).• Wavelink Avalanche MC Console 4.2 or later.• A Wavelink Device License for each client device.To use Avalanche Remote Control, the follow additional items are required:• Wavelink Remote Control plug-in, 2.0 or later• A Wavelink Remote Control License for each client deviceInstalling the Enabler on LXE DevicesLXE CE devices have the Avalanche Enabler installation files loaded, but not installed, on the mobile device when it is shippedfrom LXE. The installation files are located in the \System folder on CE devices.Note: Important: If the user is NOT using Wavelink Avalanche to manage their mobile device(s), the Enabler should notbe installed on the mobile device(s). Doing so results in unnecessary delays when booting the device.E-EQ-HX2RG-M [ 170 ] HX2 Reference Guide