You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Bluetooth Barcode Reader SetupBluetooth Barcode Reader SetupPlease refer to the Bluetooth scanner manufacturer’s User <strong>Guide</strong>; it may be available on the manufacturer’s web site. Contactyour LXE representative for Bluetooth product assistance.LXE supports several different types of barcode readers. This section describes the interaction and setup for a mobileBluetooth laser scanner or laser imager connected to the <strong>HX2</strong> using Bluetooth functions.Prerequisites• The <strong>HX2</strong> has the Bluetooth hardware and software installed. An operating system upgrade may be required. Contactyour LXE representative for details.• If the <strong>HX2</strong> has a Bluetooth address identifier barcode label affixed, then Bluetooth hardware and software is installed.• The mobile Bluetooth laser scanner / laser imager battery is fully charged.• The <strong>HX2</strong> main battery is fully charged. Alternatively, the <strong>HX2</strong> may be in a powered cradle or cabled to AC/DC power.• Important: The barcode numbering examples in this segment are not real and should not be created nor scanned with aBluetooth scanner.• To open the LXEZ Pairing program, tap Start | Settings | Control Panel | Bluetooth or tap the Bluetooth icon on thedesktop or tap the Bluetooth icon in the taskbar.Sample Bluetooth Address Barcode LabelLocate the barcode label, similar to the one shown above, attached to the <strong>HX2</strong>. The label is the Bluetooth address identifier forthe <strong>HX2</strong>.The mobile Bluetooth scanner / imager requires this information before discovering, pairing, connecting or disconnecting canoccur.Important: The <strong>HX2</strong> Bluetooth address identifier label should remain protected from damage (rips, tears, spills, soiling,erasure, etc.) at all times. It may be required when pairing, connecting, and disconnecting new Bluetooth barcode readers.<strong>HX2</strong> with LabelIf the <strong>HX2</strong> has a Bluetooth address barcode label attached, follow these steps:1. Scan the Bluetooth address barcode label, attached to the <strong>HX2</strong>, with the LXE Bluetooth mobile scanner.2. If this is the first time the Bluetooth mobile scanner has scanned the <strong>HX2</strong> Bluetooth label, the devices are paired. Seesection titled “Bluetooth Beep and LED Indications”. If the devices do not pair successfully, go to the next step.3. Open the LXEZ Pairing panel (Start | Settings | Control Panel | Bluetooth).4. Tap Discover. Locate the Bluetooth scanner in the Discovery panel.5. Double-tap the stylus on the Bluetooth mobile device in the list. The right-mouse-click menu appears.6. Select Pair as Scanner to pair the <strong>HX2</strong> with the Bluetooth mobile scanner.The devices are paired. The Bluetooth mobile barcode reader responds with a series of beeps and an LED flashes. Refer to thefollowing section titled “Bluetooth Beep and LED Indications”.Note: After scanning the <strong>HX2</strong> Bluetooth label, if there is no beep and no LED flash from the Bluetooth mobile device, thedevices are currently paired.E-EQ-<strong>HX2</strong>RG-M [ 98 ] <strong>HX2</strong> <strong>Reference</strong> <strong>Guide</strong>
Change language