HX2 Reference Guide - Delfi

Bluetooth Beep and LED IndicationsBluetooth Beep and LED IndicationsBeep Type from Bluetooth DeviceAcknowledge labelLabel rejectedTransmission errorLink successfulLink unsuccessfulBehavior1 beep2 beeps at low frequencyBeep will sound high-low-high-lowBeep will sound low-medium-highBeep will sound high-low-high-lowLED on Bluetooth DeviceYellow LED blinks at 2 HzOffYellow LED blinks at 50 HzYellow LED blinks at the same rate as the paging beep (1 Hz)Green LED blinks once a secondBehaviorLinking in progressDisconnected or unlinkedBluetooth transmission in progressPagingDisabled indicationUpon startup, if the scanner sounds a long tone, this means the scanner has not passed its automatic Selftest and has enteredisolation mode. If the scanner is reset, the sequence is repeated. Contact your LXE representative or LXE Customer Supportfor assistance.Bluetooth Printer SetupThe Bluetooth managed device should be as close as possible, in direct line of sight, with the HX2 during the pairing process.1. Open the LXEZ Pairing Panel.2. Tap Discover. Locate the Bluetooth printer in the Discovery panel.3. Tap and hold the stylus (or doubletap) on the Bluetooth printer ID until the right-mouse-click menu appears.4. Select Pair as Printer to pair the HX2 with the Bluetooth managed printer.The devices are paired. The Bluetooth managed printer may respond with a series of beeps or LED flashes.Please refer to the Bluetooth managed printer manufacturer’s User Guide; it may be available on the manufacturer’s web site.Contact your LXE representative for Bluetooth product assistance.Note: If there is no beep or no LED flash from the Bluetooth managed printer, the HX2 and the printer are currently paired.Easy Pairing and Auto-ReconnectThe Bluetooth module can establish relationships with new devices after the user taps the Discover button. It can autoreconnectto devices previously known but which have gone out of range and then returned within range. See "Reconnect" onpage 90Note: Configuration elements are persistent and stored in the registry.Setup the Bluetooth module to establish how the user is notified by easy pairing and auto-reconnect events.AppLock, if installed, does not stop the end-user from using the Bluetooth application, nor does it stop other Bluetooth-enableddevices from pairing with the HX2 while AppLock is in control.E-EQ-HX2RG-M [ 100 ] HX2 Reference Guide