HX2 Reference Guide - Delfi

Security PanelSecurity PanelSecurity PanelHotkeySpecify the hotkey sequence that triggers AppLock to switch between administrator and user modes and the passwordrequired to enter Administrator mode. The default hotkey sequence is Shift+Ctrl+A.A 2 nd key keypress is an invalid keypress for a hotkey sequence.Move the cursor to the Hot Key text box. Enter the new hot key sequence by first pressing the Shift state key followed by anormal key. The hotkey selected must be a key sequence that the application being locked does not use. The hotkey sequenceis intercepted by AppLock and is not passed to the application.Input from the keyboard or Input Panel is accepted with the restriction that the normal key must be pressed from the keyboardwhen switching modes. The hotkey sequence is displayed in the Hot key text box with “Shift”, “Alt”, and “Ctrl” text stringsrepresenting the shift state keys. The normal keyboard key completes the hotkey sequence. The hotkey must be entered viathe keypad. Some hotkeys cannot be entered via the Input Panel. Also, hotkeys entered via the SIP are not guaranteed to workproperly when switching operational modes.For example, if the ‘Ctrl’ key is pressed followed by ‘A’, “Ctrl+A” is entered in the text box. If another key is pressed after anormal key press, the hotkey sequence is cleared and a new hotkey sequence is started.A normal key is required for the hotkey sequence and is unlike pressing the normal key during a mode switch; this key can beentered from the SIP when configuring the key. However, when the hotkey is pressed to switch modes, the normal key mustbe entered from the keypad; it cannot be entered from the SIP.PasswordMove the cursor to the Password text box. The passwords entered in the Password and Confirm Password fields must match.Passwords are case sensitive.When the user exits the Administrator Control panel, the two passwords are compared to verify that they match. If they do notmatch, a dialog box is displayed notifying the user of the error. After the user closes the dialog box, the Security Panel isdisplayed and the password can then be entered and confirmed again. If the passwords match, the password is encrypted andsaved.See Also: Passwords and TroubleshootingE-EQ-HX2RG-M [ 77 ] HX2 Reference Guide