HX2 Reference Guide - Delfi

PasswordPasswordStart | Settings | Control Panel | PasswordUse this panel to set HX2 user access to control panels and power up password properties.Important: This password must be entered before performing a cold boot or cold reset.If entering a power-on or screen saver password does not allow you to disable this password protection or perform a cold boot,contact Customer Support.Factory Default SettingsPasswordEnter password at Power OnEnter password at Remote Desktop Screen SaverBlankDisabledDisabled• The password and password settings are saved during a warm boot and a cold boot.• The screensaver password affects the Remote Desktop screensaver only.• After a password is assigned and saved, each time a Settings | Control Panel option is selected, the user will berequired to enter the password before the Control Panel will open.• The screensaver password is the same as the power-on password. They are not set independently.• A screensaver password cannot be created without first enabling the “Enable password protection at power-on” checkbox.• The screensaver password is not automatically enabled when the “power-on” checkbox is enabled.Enter the password in the Password text box, then press Tab and type the password again to confirm it.Enable the power-on checkbox and, if desired, the screensaver checkbox.A changed/saved password is in effect immediately.E-EQ-HX2RG-M [ 133 ] HX2 Reference Guide