HX2 Reference Guide - Delfi

Main TabMain TabStart | Programs | Summit | Main tabFactory Default SettingsAdmin LoginRadioActive Config/ProfileRegulatory DomainSUMMITEnabledDefaultFCC or ETSISCU - Main TabThe Main tab displays information about the wireless client device including:• SCU (Summit Client Utility) version• Driver version• Radio Type (BG is an 802.11 b/g radio, ABG is an 802.11 a/b/g radio).• Regulatory Domain• Copyright Information can be accessed by tapping the About SCU button• Active Config profile / Active Profile name• Status of the client (Down, Associated, Authenticated, etc).The Active Profile can be switched without logging in to Admin mode. Selecting a different profile from the drop down list doesnot require logging in to Administrator mode. The profile must already exist. LXE recommends performing a Suspend/Resumefunction when changing profiles. Profiles can be created or edited after the Admin login password has been entered andaccepted.When the profile named “ThirdPartyConfig” is chosen as the active profile, the Summit Client Utility passes control toWindows Zero Config for configuration of all client and security settings for the network module.The Disable Radio button can be used to disable the network card. Once disabled, the button label changes to Enable Radio.By default the radio is enabled.The Admin Login button provides access to editing wireless parameters. Profile and Global may only be edited after enteringthe Admin Login password.The password is case-sensitive.E-EQ-HX2RG-M [ 199 ] HX2 Reference Guide