HX2 Reference Guide - Delfi

MixerMixerStart | Settings | Control Panel | MixerThe HX2 has a speaker and a microphone. They are active when a headset is not connected to the device.The microphone is located to the right of the LXE oval logo at the top of the unit.Use the settings on these panels to adjust the volume, record gain and sidetone for microphone input, speaker and speakeroutput.Headsets can be enabled, disabled and selected using these panels.Mixer OutputTap and hold the sliders. Move them either left or right, or tap the left and right arrows, to adjust decibel level.Output BoostWhen checked (enabled) increases the sensitivity of the headset by +6db.Mixer InputTap and hold the slider. Move it either left or right, or tap the left and right arrows, to adjust decibel level.OptionNoneInternalMicFunctionWhen enabled, the internal microphone is turned off. The default is unchecked (disabled).When enabled, the internal microphone is turned on. The default is checked (enabled).Enable the Input Boost checkbox to boost Record Gain by 20 dB.For example, if Record Gain is set to 40 dB and Input Boost is enabled, the dB for microphone output is boostedby 20 dB. The resulting microphone output would be approximately 60 dB.Bluetooth Future use.EnableHeadsetInputBoostRecordGainWhen Enable Headset is unchecked (disabled), the internal speaker and microphone are enabled. When EnableHeadset is checked (enabled), the internal speaker and microphone are disabled. The default is checked(enabled).When you will be using a tethered battery/audio cable without a headset, disable the Enable Headset parameter.When checked (enabled) increases the sensitivity of the microphone (internal or headset) by 20 dB.Tap and hold the slider and move it left and right to adjust. Or tap the left and right arrow keys to adjust the slider.The default is 22.5 dB.E-EQ-HX2RG-M [ 122 ] HX2 Reference Guide