HX2 Reference Guide - Delfi

WarmbootWarmbootA warmboot reboots the computer without erasing any registry data. However, any applications installed to RAM are lost, as isall data in RAM. This occurs because the operating system is stored on the flash drive, but must be loaded into RAM to run.All registry configurations are automatically preserved. Any applications stored as .CAB files in the System folder andconfigured in the Registry to persist are reinstalled on boot up by the Launch utility.ColdbootA coldboot reboots the computer, erases all registry data and returns the computer to factory default settings. In order to bepreserved, applications and data must be stored in the System folder. Registry information is not preserved. Only factorydefault applications and drivers stored as .CAB files in the System folder are loaded by Launch.A cold boot is initiated by running the Coldboot application in the Windows folder. This application automatically cold boots theHX2, erasing any customer applied registry changes and returning the HX2 to its factory settings.Clearing Persistent Storage / Reset to Default SettingsThe coldboot utility sets all registry settings back to LXE factory defaults. No other clearing is available or necessary.E-EQ-HX2RG-M [ 30 ] HX2 Reference Guide