HX2 Reference Guide - Delfi

HX2 without LabelHX2 without LabelIf the HX2 Bluetooth address barcode label does not exist, follow these steps to create a unique Bluetooth address barcode forthe HX2:First, locate the HX2 Bluetooth address by tapping Start | Settings | Control Panel | Bluetooth | About tab.Next, create 1 a Bluetooth address barcode label for the HX2.The format for the barcode label is as follows:• Barcode type must be Code 128.• FNC3 character followed by string Uppercase L, lowercase n, lowercase k, uppercase B and then the Bluetoothaddress (12 hex digits, no colons). For example, LnkB0400fd002031.Create and print the label.Scan the HX2 Bluetooth address barcode label with the Bluetooth barcode reader.The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED flashes.Note: After scanning the HX2 Bluetooth label, if there is no beep and no LED flash from the Bluetooth barcode reader, thedevices are currently paired.See "Bluetooth Beep and LED Indications" on page 1001 Free barcode creation software is available for download on the World Wide Web. Search using the keywords “barcodecreate”.E-EQ-HX2RG-M [ 99 ] HX2 Reference Guide