HX2 Reference Guide - Delfi

Connect via USBConnect via USBThe default connection type is USB ClientTo change the connection type or to verify it is set to USB, select Start | Settings | Control Panel | PC Connection.Tap the Change button. From the popup list, chooseUSB ClientThis will set up the mobile device to use the USB port. Tap OK and ensure the check box for “Allow connection with desktopcomputer when device is attached” is checked.Tap OK to return to the Control Panel. If desired, any control panel windows may be closed.IMPORTANT – DO NOT PUT THE MOBILE DEVICE INTO SUSPEND WHILE CONNECTED VIA USB. The device will beunable to connect to the host PC when it resumes operation.Connect the correct cable to the PC (the host) and the mobile device (the client) as detailed below. USB will start automaticallywhen the USB cable is connected, not requiring you to select “Connect” from the start menu.Cable for USB ActiveSync Connection:If a cradle is used:HX2312DSKCRDL or HX2313DSKCRDL - HX2 desk cradleUse with standard USB cable with type A plug for PC/Laptop USB port and type B plug for HX2 cradle USB type B clientport.• Plug the type B end of the standard USB cable plug into the USB type B port on the HX2 cradle (port #2).• The USB type A connector on the standard cable connects to a USB port on a PC or laptop.• The USB client (port #1) connector on the cradle does not need to be connected.E-EQ-HX2RG-M [ 50 ] HX2 Reference Guide