HX2 Reference Guide - Delfi

Enable Code IDEnable Code IDThis parameter programs the scanner to transmit the specified Code ID and/or determines the type of barcode identifier beingprocessed.Transmission of the Code ID is enabled at the scanner for all barcode symbologies, not for an individual symbology. Code ID issent from the scanner so the scanner driver can discriminate between symbologies.Options• None: Programs an internal scanner to disable transmission of a code ID. After clicking the Symbology Settings button,the only entry on the Symbology listing is All, plus any configured custom IDs. Select this option to disable Code IDprocessing. The barcode data is received, but is not checked for a Code ID.• AIM: Programs an internal scanner to transmit the AIM ID with each barcode. After clicking the Symbology Settings button,the Symbology listing includes all AIM ID symbologies plus any configured custom Code IDs. Select this option toenable processing of barcodes with an AIM or custom Code ID.• Symbol: Programs an internal scanner to transmit the Symbol ID with each barcode. After clicking the Symbology Settingsbutton, the Symbology listing includes all Symbol ID symbologies plus any configured custom Code IDs. Selectthis option to enable processing of barcodes with a Symbol or custom Code ID. Note that the Symbol entry may notappear for any device equipped with an integrated imager (e.g. EV-15 imager).• Custom: Does not change the internal scanner’s Code ID transmission setting. After clicking the Symbology Settingsbutton, the Symbology listing includes all Custom Code IDs. Select this option to enable processing of barcodes with acustom Code ID.E-EQ-HX2RG-M [ 148 ] HX2 Reference Guide