HX2 Reference Guide - Delfi

Barcode TabBarcode TabStart | Settings | Control Panel | Scanner | Barcode tabThe Barcode tab contains several options to control barcode processing. Options include:Notes:• Defining custom Code IDs• Disable processing of specified barcode symbologies• Rejecting barcode data that is too short or too long• Stripping characters including Code ID, leading or trailing characters and specified barcode data strings• Replacing control characters• Adding a prefix and a suffix.• When Continuous Scan Mode is enabled, set the Timeout between same symbol to a value sufficient to prevent thebeeper from continuously beeping when a symbol is left in the scanner’s field of view.• The Scanner application (Wedge) can only enable or disable barcode processing inside the Wedge software.• The Scanner application enables or disables the Code ID that may be scanned.• Enabling or disabling a specific barcode symbology is done manually using the configuration barcode in the IntegratedScanner Programming Guide (available on the LXE Manuals CD and the LXE ServicePass website).Choose an option in the Enable Code ID drop-down box: None, AIM ID, Symbol ID, or Custom ID.E-EQ-HX2RG-M [ 146 ] HX2 Reference Guide