HX2 Reference Guide - Delfi

Strip Leading/Trailing ControlStrip Leading/Trailing ControlThis group of controls determines what data is removed from the barcode before the data is buffered for the application. Whenall values are set, Code ID takes precedence over Leading and Trailing; Barcode Data stripping is performed last. Strippingoccurs before the Prefix and Suffix are added, so does not affect them.If the total number of characters being stripped is greater than the number of characters in the barcode data, it becomes a zerobyte data string. If, in addition, Strip Code ID is enabled, and no prefix or suffix is configured, the processing will return a zerobytedata packet, which will be rejected.The operation of each type of stripping is defined below:LeadingThis strips the number of characters specified from the beginning of the barcode data (not including Code ID). The data isstripped unconditionally. This action is disabled by default.TrailingThis strips the number of characters specified from the end of the barcode data (not including Code ID). The data is strippedunconditionally. This action is disabled by default.Code IDStrips the Code ID based on the type code id specified in the Enable Code ID field in the Barcode tab. By default, Code IDstripping is enabled for all symbologies (meaning code IDs will be stripped, unless specifically configured otherwise).E-EQ-HX2RG-M [ 158 ] HX2 Reference Guide