HX2 Reference Guide - Delfi

ParametersParametersEnableThis checkbox enables (checked) or disables (unchecked) the symbology field.The scanner driver searches the beginning of the barcode data for the type of ID specified in the Barcode tab -- Enable Code IDfield (AIM or Symbol) plus any custom identifiers.When a code ID match is found as the scanner driver processes incoming barcode data, if the symbology is disabled, thebarcode is rejected. Otherwise, the other settings in the dialog are applied and the barcode is processed. If the symbology isdisabled, all other fields on this dialog are grayed.When there are no customized symbology settings, and the Enable checkbox is unchecked, while All is selected, a warningmessage is displayed.Click the Yes button or the No button. Click the X button to close the dialog without making a decision.If there are customized settings, uncheck the Enable checkbox for the All symbology. This results in disabling all symbologiesexcept the customized ones.MinThis field specifies the minimum length that the barcode data (not including Code ID) must meet to be processed.Any barcode scanned that is less than the number of characters specified in the Min field is rejected. The default for this field is1.MaxThis field specifies the maximum length that the barcode data (not including Code ID) can be processed. Any barcode scannedthat has more characters than specified in the Max field is rejected. The default for this field is All (9999).If the value entered is greater than the maximum value allowed for that symbology, the maximum valid length is used instead.E-EQ-HX2RG-M [ 157 ] HX2 Reference Guide