HX2 Reference Guide - Delfi

ButtonsButtonsButtonCommitCredentialsDeleteNewRenameFunctionSaves the profile settings made on this screen. Settings are saved in the profile.Allows entry of a username and password, certificate names, and other information required to authenticate withthe access point. The information required depends on the EAP type.Deletes the profile. The current active profile cannot be deleted and an error message is displayed if a delete isattempted.Creates a new profile with the default settings (see Profile Parameters) and prompts for a unique name. If thename is not unique, an error message is displayed and the new profile is not created.Assigns a new, unique name. If the new name is not unique, an error message is displayed and the profile is notrenamed.Opens a window that lists access points that are broadcasting their SSIDs. Tap the Refresh button to view anupdated list of APs. Each AP’s SSID, its received signal strength indication (RSSI) and whether or not dataencryption is in use (true or false). Sort the list by tapping on the column headers.If the scan finds more than one AP with the same SSID, the list displays the AP with the strongest RSSI and theleast security.ScanWEP Keys/ PSKKeysSCU – ScanIf you are logged in as an Admin, tap an SSID in the list and tap the Configure button, you return to the Profilewindow to recreate a profile for that SSID, with the profile name being the same as the SSID (or the SSID with asuffix such as “_1” if a profile with the SSID as its name exists already).Allows entry of WEP keys or pass phrase as required by the type of encryption.Note: Unsaved Changes – The SCU will display a reminder if the Commit button is not clicked before an attempt is madeto close or browse away from this tab.Important – The settings for Auth Type, EAP Type and Encryption depend on the security type chosen.E-EQ-HX2RG-M [ 203 ] HX2 Reference Guide