HX2 Reference Guide - Delfi

BatteryBatteryStart | Settings | Control Panel | BatteryThis panel is used to view the status and percentage of power remaining in the HX2 main battery. The data cannot be edited bythe user.The battery gas gauge icon resides in the system tray and shows four levels of charge – 100%, 75%, 50%, 25%. At apoint below 25%, the system status LED will turn red and the gas gauge icon will turn red indicating the battery is low.Jacked is shown in the Status box when the Main battery is receiving external power.The main battery is charged/recharged when the HX2 is docked in a powered cradle or directly cabled to an external powersource.The backup battery draws power from the Main battery to maintain a charge. The backup battery voltage and percentage ofpower fluctuate continuously.When there is no Main battery in the unit, the backup battery begins to discharge as it maintains RAM and other vital settings.After a Main battery is installed, the backup battery begins to draw power from the Main battery again.Note: Frequent connection to an external power source, if feasible, is recommended to maintain backup battery chargestatus as the backup battery cannot be recharged by a dead or missing main battery.Backup Battery MaintenanceLXE recommends Discharging and Recharging the backup battery twice a year. Use the Charge or Discharge buttons tocharge and discharge the backup battery:To ChargeTap the Charge button. The Discharge button text changes to “Off”. When the backup battery is charging, tap the Off button tostop the Charge process.To DischargeTap the Discharge button. The Charge button text changes to “Off”. When the backup battery is discharging, tap the Off buttonto stop the Discharge process.E-EQ-HX2RG-M [ 81 ] HX2 Reference Guide