HX2 Reference Guide - Delfi

Avalanche Update using File | SettingsAvalanche Update using File | SettingsUse these menu options to setup the Avalanche Enabler on the HX2. LXE recommends changing settings and then saving thechanges (reboot) before connecting to the network.Alternatively, the Mobile Device Server can be disabled until needed (refer to the Wavelink Avalanche Mobility CenterUser’s Guide for details).Menu OptionsNote: Your HX2 screen display may not be exactly as shown in the following menu options. Contact your LXErepresentative for version information and upgrade availability.ConnectionExecutionServer ContactStartup/ShutdownTaskbarScan ConfigDisplayShortcutsAdaptersStatusEnter the IP Address or host name of the Mobile Device Server. Set the order in which serial ports orRF connections are used to check for the presence of the Mobile Device Server.Not available in this release. LXE recommends using AppLock, which is resident on each WindowsCE device.Setup synchronization, scheduled Mobile Device Server contact, suspend and reboot settings.Set options for Enabler program startup or shutdown.Set options for Taskbar.This option allows the user to configure Enabler settings using a special barcode that is created bythe Avalanche MC Console. Scan Config not currently supported by LXE.Set up the Windows display at startup, on connect and during normal mode. The settings can beadjusted by the user.Add, delete and update shortcuts to user-allowable applications.Enable or disable network and wireless settings. Select an adapter and switch between theAvalanche Network Profile and manual settings.View the current adapter signal strength and quality, IP address, MAC address, SSID, BSSID andLink speed. The user cannot edit this information.E-EQ-HX2RG-M [ 177 ] HX2 Reference Guide