HX2 Reference Guide - Delfi

Add Prefix/Suffix ControlAdd Prefix/Suffix ControlUse this option to specify a string of text, hex values or hat encoded values to be added to the beginning (prefix) or the end(suffix) of the barcode data. Up to 19 characters can be included in the string. The string can include any character from thekeyboard plus characters specified by hex equivalent or entering in hat encoding. Please see Hat Encoding and Decimal-Hexadecimal Chart sections in the Appendix for a list of characters with their hex and hat-encoded values.Using the Escape function allows entering of literal hex and hat values.Add PrefixTo enable a prefix, check the Prefix checkbox and enter the desired string in the textbox.The default is disabled (unchecked) with a blank text string. When barcode data is processed, thePrefix string is sent to the output buffer before any other data.Because all stripping operations have already occurred, stripping settings do not affect the prefix.The prefix is added to the output buffer for the Symbology selected from the pull down list.If ‘All’ is selected, the prefix is added for any symbology that has not been specifically configured.Add SuffixTo enable a suffix, check the Suffix checkbox and enter the desired string in the textbox.The default is disabled (unchecked) with a blank text string. When barcode data is processed, theSuffix string is sent to the output buffer after the barcode data.Because all stripping operations have already occurred, stripping settings do not affect the suffix.The suffix is added to the output buffer for the Symbology selected from the pull down list.If ‘All’ is selected, the suffix is added for any symbology that has not been specifically configured.Note: Non-ASCII equivalent keys in Key Message mode are unavailable in this option. Non-ASCII equivalent keysinclude the function keys (e.g. F1), arrow keys, Page up, Page down, Home, and End.E-EQ-HX2RG-M [ 161 ] HX2 Reference Guide