HX2 Reference Guide - Delfi

On ModeOn ModeThe DisplayWhen the display is On:• the keypad, touchscreen and all peripherals function normally• the display backlight is on until the Backlight timer expiresThe HX2After a new HX2 has been received, a charged battery tethered, and the Power key tapped, the HX2 is always On until bothbatteries are drained completely of power.When the tethered battery and backup battery are drained completely, the unit is in the Off mode. The unit transitions from theOff mode to the On mode when a charged battery is attached to the tether or external power is applied (for example, by dockingthe HX2 in a powered cradle) and the HX2 Power key is pressed.Suspend ModeThe HX2The Suspend mode is entered when the unit is inactive for a predetermined period of time or the user taps the Power key.HX2 Suspend timers are set using Start | Settings | Control Panel | Power | Schemes tab.Wake up Events - all configurable via an LXE Power Management API call:• Any key on the keypad• Stylus touch on the touchscreen• Scan button on ring scanner pressed• Docked in a powered cradle• Power button tapWhen the unit wakes up, the Display Backlight and the Power Off timers begin the countdown again. When any one of theabove events occurs prior to the Power Off timer expiring, the timer starts the countdown again.The HX2 should be placed in Suspend Mode before hotswapping the main battery.Hotswapping the Ring Scanner does not require placing the HX2 in Suspend Mode.Off ModeThe unit is in Off Mode when the tethered battery and the backup battery are depleted. Connect a fully charged main batteryand press the Power key to turn the HX2 On.E-EQ-HX2RG-M [ 24 ] HX2 Reference Guide