Line 6 Bass POD xt Live User Manual - MIDI Manuals

Creating & Storing Sounds • Saving YourselfMIDI DumpsIf you want to transfer one or more tones directly from one Bass PODXT Live toanother Bass PODXT Live, or between Bass PODXT Live and a MIDI datarecorder, workstation, computer or sequencer, read on. For communication toMIDI hardware, you’ll need to use a standard MIDI cable to connect the MIDIOut of your PODXT Live to the MIDI In of the receiving device. If you’reexchanging MIDI with a computer, you also have the option of installing the BassPODXT Live USB Driver software (a free download using Line 6 Monkey,available from www.line6.com/monkey) and have your Bass PODXT Liveexchange MIDI messages with your computer over a USB cable.You can then transfer:•All Channels•The Current Channel•The Effect Setups•The Amp Setups (including your customizations)4 • 17Transferring All Channel Memories - This feature will let you send all of yourBass PODXT Live’s Channel Memories out via MIDI for a complete back-up of the64 Channel Memories:Press SAVE once, and use the SELECT knob to scroll down to this page:Press the button under SELECT. Turn the EFFECT TWEAK knob to the left(counterclockwise) until the display reads:Press SAVE again and your Bass PODXT Live’s 64 Channel Memories are sent out ofits MIDI jack. If another Bass PODXT Live is connected, this data makes it a virtualclone of your own Bass PODXT Live channels! Who knew cloning was so easy?