CA Workload Automation iXp User Guide - CA Technologies

InstallationIf these variables are defined, the Configuration File (see below) is ignored.Configuration FileYou must create a configuration file under the IXP_HOME/etc directory if theIXP_SERVER_URL variable is not defined in the environment. This file calledixp.conf contains a single line that provides the URL of the iXp Server to theClient CLI.The following command will create this file.echo “IXP_SERVER_URL=http://IXP_SERVER:PORT” >$IXP_HOME/etc/ixp.confecho IXP_SERVER_URL=http://IXP_SERVER:PORT >%IXP_HOME%\etc\ixp.conf(UNIX/Linux)(Windows)where,IXP_SERVER = The machine/IP address of the iXp ServerPORT = The HTTP port number of the iXp Server.For example,echo IXP_SERVER_URL=http://venus:8080 > C:\ixphome\etc\ixp.confIf the IXP_SERVER_URL variable is defined in the environment, theconfiguration file is ignored. Once the configuration file has been created or thevariable defined, you can run the client CLI.If there is an alternate iXp server running for high availability, then an additionalline can be added in the file to provide its connection information to the CLI.echo “IXP_SERVER_URL_2=http://IXP_SERVER_2:PORT” >>$IXP_HOME/etc/ixp.confwhere,IXP_SERVER_2 = Machine/IP address of the alternate iXp ServerPORT = The HTTP port of the alternate iXp Web ServerSimilarly, the above can be set as an environment variable.iXp CLIENT CLI 121