Register your product now - Radiometer Analytical

5.2 The PGP201 Potentiostat - Galvanostat5.2.1 The front panel8 9 10ONPGP201POTENTIOSTAT GALVANOSTATOperation/StandbyVg OUTVs OUTVg INAUXOFFStart/StopE OUTI OUTREFWORK12 34 5 6 711For all that follows, “Manual mode” means using the PGP201 as stand aloneinstrument (without a PC and VoltaMaster 4).On/Off switch (1)Alphanumeric LCD display (2)with 2 lines of 16 characters (8 mm high). The first line is dedicated for data entryand the second for potential or current readings.Arrow keys (3)These keys are used in “Manual mode”.These arrow keys are used to scroll up or down the operating data displayed onthe first line of the PGP201 display (UP/DOWN arrow keys) or to enter a value oran option (LEFT/RIGHT arrow keys).“Operation/Standby” key (4)This key is used in “Manual mode”.Press this key to apply a current or to allow a current to pass through theelectrochemical cell (PGP201 in “OPERATION” mode). In “OPERATION” mode,pressing the “OPERATION/STAND BY” key turns the PGP201 to the “STAND BY”mode (no current passes through the cell).Refer to the PGP201 User’s Manual for more information.“Start/Stop” key (5)This key is used in “Manual mode”.Press this key to turn the PGP201 to the “OPERATION” mode and start a potential/current scan. In the “START” mode, the potential or current scan is performed byVoltaLab 21/06/10/40/50/80 135Section 5, Chapter 2: The PGP201 Potentiostat/Galvanostat