Register your product now - Radiometer Analytical

4.3.53 Print ReportThe Print Report method is used within a sequence to get an automatic reportprintout. It can be very useful whenever you have to compare an experimentalcurve with a reference curve. For this report, you define 2 graphs of 2 curves each.The 4 curves can come from any method of the current sequence or from anycurve stored on your disk. You can select between the raw data or the recalculateddata curve if necessary. For each curve, you select the colour, the point marker,the line style and the line thicknesses. For each graph, you select the X and Y1axes, the X and Y1 axis limits and whether to print out a scaling grid. For the reporttitle, you can select the Main curve title, the sequence title or type your own title.The printout also reports the initial data of the sequence and 3 lines of commentsof your choice. While running the sequence, the report is printed to the Windowsdefault printer.Consult the Help file, keyword index: Print Report method.4.3.54 Yes or No?The Yes or No? method is used to ask for a question and prompts you for a Yes orNo answer. Depending on your answer, VoltaMaster 4 goes on with method x ormethod y. Methods x and y are selected within the current sequence. For example,you can use this method to ask to run a blank within a sequence with a Standardcalibration method.Consult the Help file, keyword index: Yes or No? method.4.3.55 Time evolutionThe Time evolution method is used to follow a result versus time and store thecorresponding curve. The Time Evolution should be placed within a “loop” inthe sequence. The minimum “loop” consists of acquisition method, a calculationmethod, a Time evolution method and is ended by a Jump to method. The Timeevolution method is available in either virtual mode or real mode with a VoltaLab 50and VoltaLab 80.Consult the Help file, keyword index: Time evolution method.4.3.56 Result from resultsThe Result from Results method is used to calculate a result as a linearcombination of two previous results. A label and a specific unit can be attributed bythe programmer. It is an easy way to calculate the charge between two peaks forinstance. The Result from Results method is available in either virtual mode or realmode with a VoltaLab 40, VoltaLab 50 and VoltaLab 80.Consult the Help file, keyword index: Time evolution method.VoltaMaster 4 - Version 7.0x 65Section 4, Chapter 3: Methods available