Register your product now - Radiometer Analytical

4.7.3 Preparing a printoutThe “File - Page Setup” command of VoltaMaster 4 enables to select the topics tobe printed and is used to edit page headers and footers. Proceed as follows:1. Select the “File” menu of the VoltaMaster 4 menu bar, then the “Page Setup”command. The “Page Setup” window is displayed.2. In the “Header” box, type a text to be placed out at the top of each page ofthe document to be printed out. The file name, the current date and the pagenumber can also be inserted by typing respectively &f, &d and &p.Example: to have the page number printed on the top of each page ofdocument, enter &p in the “Header” box.3. In the “Footer” box, type a text to be placed out at the bottom of each page ofthe document to be printed out. The file name, the current date and the pagenumber can also be inserted by typing respectively &f, &d and &p.Example: to have the current date printed on the bottom of each page ofdocument, enter &d in the “Footer” box.4. In the “Method” box, select the topics to be printed out after selection of the“File - Print” command from a experiment (sequence of methods) applicationwindow.Initial data: the initial data entered for the current experiment.Cell setup: the cell setup data entered.Operating conditions: the operating data of each method of the currentexperiment.Laboratory logbook: the contents of the laboratory logbook (application note)entered for the current experiment.VoltaMaster 4 - Version 7.0x 83Section 4, Chapter 7: Printouts