Register your product now - Radiometer Analytical

If the EDI10000 is used:ONE(X) INI (Y) INVg INA/D INREFSENSEI OUTE OUTVg OUTD/A OUTAUXWORKCELL2 31TACHYPROCESSEURONOFFrpmCONTROL SELECTOR0-5 VMANUALSERIAL6000-10000 rpmX 10EDI10000TACHYPROCESSEUR (front panel)Cable DescriptionPart no.1 TACHYPROCESSOR “EAD/EDI” 6-pin male socket on A95A512the rear panel to electrical contact of EDI10000(JAEGER 6F / 1.00 m / JAEGER 6F).This cable is supplied with the TACHYPROCESSOR.2 PGZ or PST050 “D/A OUT” socket to “EXTERNAL SOCKET 0-5V”2 banana sockets of the CTV101 (BNC / 1 m / 2 bananas) A95R5033 PGZ or PST050 “WORK” socket to electrical contact of EDI10000 A95A123(UHF-PL259/1.00 m/FX-M + 2 mm/ 4 mm adapter).Cable supplied with the CK112.The 2 mm/ 4 mm adapter is supplied with the EDI10000.6.1.2 SettingsOn the CTV101Turn the CTV101 switch to “EXTERNAL CONTROL”.Adjust the E voltage value between 0 and +5 V on the DC source using thefollowing relation: n = E.n = rotation speed of the EDI101 in rpm (revolution per minute).E = external voltage applied in mV.To stop the electrode, turn the switch to “STOP” or apply a 0 V voltage at theCTV101 “EXT/0-5 V” BNC socket.150VoltaLab 21/06/10/40/50/80Section 6, Chapter 1: Rotating Disc Electrode (EDI)