Register your product now - Radiometer Analytical

Curve type bar - XX is the abscissa axis of a graph window. When you open a curve, the curve axissystem used is defined as Y1 = f(X). You can select different types of X axesdepending on the curve displayed: potential, current, time, frequency, module, phase,capacitance, resistance, A/D IN (V), reprocessed A/D IN, corrosion, concentration orquantity of electricity.Consult the Help file, keyword index:X (Curve type bar).Curve type bar - Y1Y1 is the ordinate axis displayed on the left hand side of the graph window. Whenyou open a curve, the curve axis system used is defined as Y1 = f(X). As for the Xabscissa axis, you can select different types of Y1 axes for depending on the curvedisplayed.Consult the Help file, keyword index:Y1 (Curve type bar).Curve type bar - Y2Y2 is the ordinate axis displayed on the right hand side of the graph window. Clickin this “Y2” box if you want to superimpose to the Y1 = f(X) curve(s), the same curveusing a new axis system Y2 = f(X). To display the curve(s) of a current graph in oneaxis system only (Y1 = f(X)), select “Y2 = No”. As for the X abscissa axis, you canselect different types of Y2 axes for depending on the curve displayed.Consult the Help file, keyword index:Y2 (Curve type bar).5. Monitor barThe Monitor bar gives information about the status of the cell and the potentiostat.When the potentiostat is not connected or not switched on, short beeps are emitted(deselect the “Toolbar - Monitor bar” command). On starting VoltaMaster 4 for thefirst time, the Monitor bar is active (displayed). Select the “Toolbar - Monitor bar”command to display or hide the Monitor bar. When an experiment is running, theMonitor bar is replaced by a Run bar.The Monitor bar is not available if you are running VoltaMaster 4 in Routine setupmode.Consult the Help file, keyword indexes:Monitor bar and Run bar.VoltaMaster 4 - Version 7.0x 39Section 4, Chapter 1: The VoltaMaster 4 window