Register your product now - Radiometer Analytical

4. The curveWhile a sequence is in progress, VoltaMaster 4 displays the method curve in realtime.5. The “Run - Next method” command (shortcut icon: )If activated, this command goes on with the next method if programmed to do so orstops the sequence if it is the last method.4.5.3 Stopping the sequence6. The “Run - Stop” command (shortcut icon: )If activated, this command stops, the sequence. The results of the current methodare saved provided.After having selected the “Run - Stop” command, VoltaMaster 4 prompts you toconfirm the end of the sequence: Are you sure you want to stop the experiment ?If “Yes” is answered, then the sequence is stopped. If “No” is answered, thesequence is not stopped.Note: If the method running is a Pot. Dynamic EIS (Impedance), a Pot. TutorialEIS (Impedance), a Gal. Tutorial EIS (Impedance) or a Pot. Fixed Freq. EIS(Capacitance), then VoltaMaster 4 waits for the end the frequency acquisition inprogress before stopping the sequence.4.5.4 End of sequence - saving curveAt the end of each method of the sequence, VoltaMaster 4 saves the curve(s) in.CRV file(s) and starts the next method of the sequence, if programmed. At the endof the last method of the sequence, the last curve obtained remains displayed ifasked for in the “Other settings” parameters (line “Display curve at end”).If a method in progress is stopped with the “Run - Next method” command (orshortcut icon: ) or with the “Run - Stop” command (or shortcut icon: ), theresults are also saved automatically.72VoltaMaster 4 - Version 7.0xSection 4, Chapter 5: Running a sequence