Register your product now - Radiometer Analytical

4.3.37 Auto. R1R2C FittingThe Auto. R1R2C Fitting method is used to fit the curve or a part of it to a circlewhile running the sequence. Place the Auto. R1R2C Fitting in the sequence justafter the EIS method for which you want to process the curve. The Auto R1R2Ccannot be set as the first method of the sequence. Method available with VoltaLab10, VoltaLab 40, VoltaLab 50 and VoltaLab 80.Consult the Help file, keyword index: Auto. R1R2C Fitting - Method editing.4.3.38 Auto. Linear ExtractionThe Auto. Linear Extraction method is used to process a curve after acquisition.The curve comes from any method of the current sequence. Q and/or dE and/or dIcolumns can be added to the curve file. The curve extract can be saved under thesame name as the original one or under a new name.Consult the Help file, keyword index: Auto. Linear Extraction - Method editing.4.3.39 Vg IN On/OffThe Vg IN On/Off method is used when you want to add the potential applied by anexternal device connected to the Vg IN socket (or GEN. socket for a VoltaLab 21)of the potentiostat to potential generated by the internal source (value entered forthe method in VoltaMaster 4). Place a Vg IN On/Off with the option Int. + externalsource selected in the sequence just before the method for which you want to addthe potential applied at the Vg IN (or GEN.) socket. Do not forget to place a Vg INOn/Off with the option Int. + external source cleared later on in the sequence if youwant to run a method without adding the potential applied at the Vg IN (or GEN.)socket. Method available with VoltaLab 10, VoltaLab 21, VoltaLab 40 and VoltaLab80.Consult the Help file, keyword index: Vg IN On/Off - Method editing.58VoltaMaster 4 - Version 7.0xSection 4, Chapter 3: Methods available