Register your product now - Radiometer Analytical

4.7.1 Connecting the printerThe printer is generally connected to a parallel port (LPT1, LPT2) of the computer.A RS232C serial port or a network interface can also be used.Examples of serial cables:RS232C cable 9-pin female/2m/9-pin female, part no. A95X501RS232C cable 9-pin female/2m/25-pin female, part no. A95X5024.7.2 Setting up the printerAs the printer is installed from the Windows installation program, VoltaMaster 4uses the print manager of Windows to communicate with the printer. Nevertheless,it is also possible to set up the printer’s parameters from VoltaMaster 4.1. Select the “File” menu of the VoltaMaster 4 menu bar, then the “Print Setup...”command. The “Printer Setup” dialogue box is displayed.2. Please refer to the Windows user’s guide to edit this dialogue box. In the“Specific Printer” box the names of the printers you have already installedare listed. If the printer used has not been installed yet, quit VoltaMaster 4 forWindows (“File - Exit” command), and install the new printer (select the “Start”button, “Parameters”, “Printers” then “Add a printer”).3. To close the “Print Setup” dialogue box and confirm the data it contains, selectthe “OK” button.82VoltaMaster 4 - Version 7.0xSection 4, Chapter 7: Printouts