Register your product now - Radiometer Analytical

The following guidances are given in a logic chronological order.You must use the VoltaMaster 4 Full setup mode or the Supervisor/Operator setupmode connected as a Supervisor.1a. Create a new sequence...Select the “Toolbar” menu then clear the “Monitor Bar” option. Click the icon inthe General bar or select the “File” menu then the “New sequence” command. TheLaboratory logbook window of a new sequence is opened. The Laboratory logbookis the first window opened upon creating a new sequence. From this window, youcan edit a Laboratory logbook (click the “Logbook” thumbnail) or edit the initial dataof the sequence (click the “Initial data” thumbnail). The Laboratory logbook and theinitial data can be edited and stored with the sequence of methods.1b. ... or load an existing sequenceYou can also load an existing sequence: click the icon of the toolbar or selectthe “File” menu then select the “Open sequence(s)” command.Consult the Help file, keyword index:Loading sequences.Loading the last edited sequencesThe last edited experiments are listed below the Print commands of the “File”menu. To load the last experiment, select the “File” command then select the first“.EXP” file listed.Loading a sequence (shortcut)From the Windows Explorer or File Manager: click the sequence file name, anddragging the mouse, move the file into the VoltaMaster 4 window then release themouse button. The sequence is loaded.2. Edit the Initial dataClick the “Initial data” thumbnail of the Laboratory logbook window then edit theinitial data of the sequence (Title, Chemical conditions, Operator’s name, Date andAreas).Consult the Help file, keyword index:Initial data.VoltaMaster 4 - Version 7.0x 67Section 4, Chapter 4: Creating a sequence