1. First steps in Reaktor Core - Native Instruments
1. First steps in Reaktor Core - Native Instruments
1. First steps in Reaktor Core - Native Instruments
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Use <strong>in</strong>terpolated versions of delays for modulated delays. For non-modulated<br />
(fixed time) delays non-<strong>in</strong>terpolated version is normally better.<br />
H.43. Delay > Diff Delay 1p / 2p / 4p<br />
1-po<strong>in</strong>t (non-<strong>in</strong>terpolated)/2-po<strong>in</strong>t <strong>in</strong>terpolated/4-po<strong>in</strong>t <strong>in</strong>terpolated diffusion<br />
delay. T <strong>in</strong>put specifies the delay time <strong>in</strong> seconds. The Dffs <strong>in</strong>put sets the<br />
diffusion factor.<br />
The maximum delay time defaults to 44,100 samples which is 1sec at 44.1kHz.<br />
To adjust the time change the size of the array <strong>in</strong> the delay macro.<br />
H.44. Envelope > ADSR<br />
Generates an ADSR Envelope.<br />
A, D, R specify attack, decay and release times <strong>in</strong> seconds<br />
S specifies susta<strong>in</strong> level (range 0..1, at 1 susta<strong>in</strong> level is equal to<br />
the peak level)<br />
G gate <strong>in</strong>put. Positive <strong>in</strong>com<strong>in</strong>g events (re-)start the envelope. Zero<br />
or negative events close the envelope<br />
GS gate sensitivity. At zero sensitivity the envelope peak has always<br />
amplitude of <strong>1.</strong> At sensitivity equal to one, the peak level is equal<br />
to the positive gate level.<br />
RM retrigger mode. Selects between analog/digital mode and between<br />
retrigger/legato mode. In “digital” mode the envelope always<br />
restarts from zero while <strong>in</strong> “analog” mode the envelope restarts<br />
from its current output level. In “retrigger” mode consecutive<br />
positive gate events will restart the envelope, while <strong>in</strong> “legato”<br />
mode it restarts only when the gate changes from negative/zero<br />
176 – REAKTOR CORE