1. First steps in Reaktor Core - Native Instruments

More documents

Recommendations

Info

Attention: we are going to insert our first module into a core structure right now! Right-click in the normal area to bring up the module creation menu: The first submenu is called Built-In Module and provides access to the builtin modules of Reaktor Core, which are generally meant to do really low-level stuff and will be discussed later. The second submenu is called Expert Macro and contains macros meant to be used alongside built-in modules for low-level stuff. The third submenu, called Standard Macro, is the one we want to use: 26 – REAKTOR CORE
The VCF section could be promising, let’s look inside: Let’s try Diode Ladder: Well, maybe that was not the best idea, because a diode ladder might sound significantly different from the primary-level filter module we are trying to replace. At minimum, Diode Ladder is a 4-pole (24dB/octave) filter, and the one we are replacing is a 2-pole filter (12dB/octave). To delete it there are two options. One is to right-click on the module and select Delete Module: REAKTOR CORE – 27
Page 1 and 2: REAKTOR CORE Tutorial
Page 3 and 4: Table of Contents 1. First steps in
Page 5 and 6: Appendix D. Core cell ports .......
Page 7 and 8: H.7. Audio Mix-Amp > Gain (dB) ....
Page 9 and 10: H.88. Logic > GT / IGT ............
Page 11 and 12: 1. First steps in Reaktor Core 1.1.
Page 13 and 14: You may also want to save core cell
Page 15 and 16: 1.3. Using core cells in a real exa
Page 17 and 18: 1.4. Basic editing of core cells No
Page 19 and 20: You can shrink them back by right-c
Page 21 and 22: or design of the module. Generally,
Page 23 and 24: And here is an example of an event
Page 25: converter. As a result, our control
Page 29 and 30: There’s only one kind of module y
Page 31 and 32: As the name implies (and the info t
Page 33 and 34: Now you can type some text into the
Page 35 and 36: Instead of a nasty looking diagonal
Page 37 and 38: Some types of processing, mixing fo
Page 39 and 40: mix it with the delayed signal. Bec
Page 41 and 42: 0.02ms at 44.1kHz, even less at hig
Page 43 and 44: The Latch and Bool C types of ports
Page 45 and 46: In the value field type a new value
Page 47 and 48: modules in the same way we did earl
Page 49 and 50: 2.5. Using audio as control signal
Page 51 and 52: some primary-level event signals us
Page 53 and 54: is always at full amplitude. At 1 t
Page 55 and 56: The Gate2L, AND, and L2Gate modules
Page 57 and 58: Here is a picture of a continuous s
Page 59 and 60: 3.3. Simultaneous events Consider t
Page 61 and 62: 3.4. Processing order As you have s
Page 63 and 64: Event Inputs send core events to th
Page 65 and 66: Of course, in this particular case
Page 67 and 68: Now move the knob and watch the out
Page 69 and 70: 4.2. Object Bus Connections Object
Page 71 and 72: As mentioned, the above structure i
Page 73 and 74: constants would send their values a
Page 75 and 76: 4.4. Building an event accumulator
Page 77 and 78:
� ��
Page 79 and 80:
Now the reset works as specified. T
Page 81 and 82:
output values. Let’s try that wit
Page 83 and 84:
Should any files be found in this C
Page 85 and 86:
The name “Modulation”, although
Page 87 and 88:
5. Audio processing at its core 5.1
Page 89 and 90:
5.2. Sampling rate clock bus A coup
Page 91 and 92:
We have already seen a structure bu
Page 93 and 94:
connections will be marked as inval
Page 95 and 96:
As you can see, the clock input of
Page 97 and 98:
left which we cannot see from the o
Page 99 and 100:
samples, we have to produce several
Page 101 and 102:
5.6. Other bad numbers Denormal num
Page 103 and 104:
6.28319 is 2*π, which is then divi
Page 105 and 106:
6. Conditional processing 6.1. Even
Page 107 and 108:
In this version, the 0 output of th
Page 109 and 110:
First we are going to build the cir
Page 111 and 112:
default means use whatever precisio
Page 113 and 114:
Switching between float and integer
Page 115 and 116:
The output and all built-in modules
Page 117 and 118:
The OBC chain at the bottom keeps t
Page 119 and 120:
The speed of the number change in t
Page 121 and 122:
And now the connection: The upper i
Page 123 and 124:
This macro internally has an Index
Page 125 and 126:
The four Write [] modules will take
Page 127 and 128:
In general, you should also take ca
Page 129 and 130:
� ��
Page 131 and 132:
The size property of the array can
Page 133 and 134:
So we include another macro for wra
Page 135 and 136:
A new dialog will appear: What you
Page 137 and 138:
Formal output precision Now that we
Page 139 and 140:
9. Building optimal structures As a
Page 141 and 142:
9.3. Numerical operations Floating
Page 143 and 144:
Appendix A. Reaktor Core user inter
Page 145 and 146:
Appendix B. Reaktor Core concept B.
Page 147 and 148:
Appendix C. Core macro ports C.1. I
Page 149 and 150:
Appendix D. Core cell ports D.1. In
Page 151 and 152:
F.3. Math > - Produces the differen
Page 153 and 154:
F.12. Bit > Bit OR Performs the bit
Page 155 and 156:
that the module on the picture abov
Page 157 and 158:
connected to the sidechain input. T
Page 159 and 160:
Appendix G. Expert macros G.1. Clip
Page 161 and 162:
G.12. Math > sqrt Square root appro
Page 163 and 164:
G.24. Memory > Read [] Reads a valu
Page 165 and 166:
Appendix H. Standard macros H.1. Au
Page 167 and 168:
H.8. Audio Mix-Amp > Invert Inverts
Page 169 and 170:
H.15. Audio Mix-Amp > XFade (lin) A
Page 171 and 172:
H.22. Audio Shaper > Sine Shaper 4
Page 173 and 174:
H.30. Control > Ctl Pan “Pans”
Page 175 and 176:
H.38. Convert > ms2sec Converts the
Page 177 and 178:
to positive. The allowed RM values
Page 179 and 180:
H.53. EQ > Static Filter > 1-pole s
Page 181 and 182:
H.62. EQ > Static Filter > 2-pole s
Page 183 and 184:
H.70. Event Processing > Ctl2Gate C
Page 185 and 186:
H.79. LFO > Random LFO Generates a
Page 187 and 188:
H.88. Logic > GT / IGT Compares the
Page 189 and 190:
Generates 4 phase-locked audio wave
Page 191 and 192:
H.105. Oscillators > Quad Osc Gener
Page 193 and 194:
H.112. VCF > Diode Ladder Diode-lad
Page 195 and 196:
I.4. Audio Shaper > Parabol Sat Sim
Page 197 and 198:
I.10. Control > Par Ctl Shaper Appl
Page 199 and 200:
I.17. EQ > HighShelf EQ 1-pole high
Page 201 and 202:
I.25. EQ > Static Filter > 2-pole s
Page 203 and 204:
I.33. Oscillator > 4-Wave Mst Gener
Page 205 and 206:
I.39. Oscillator > MultiWave Osc Ge
Page 207 and 208:
I.44. VCF > 2 Pole SV x3 S 2-pole s
Page 209 and 210:
Index A Array module ..............
show all

1. First steps in Reaktor Core - Native Instruments

Create successful ePaper yourself

Delete template?

Save as template?