Stato dell'arte energetica degli edifici - Automatica - Università degli ...

SIMEA Stato dell’arte energetica degli edifici
1.3.13.8. Strengths
104
Doc.No 20100610.SIMEA.MR.03
Versione 1
Allows rapid development of energy simulations, dramatically reducing the time required to build a
DOE-2 model. Specifying the building geometry is much faster than other comparable software, making
VisualDOE useful for schematic design studies of the building envelope or HVAC systems. Uses DOE-2 as
the simulation engine--an industry standard that has been shown to be accurate; implements DOE-2's
daylighting calculations; allows input in SI or IP units; imports CADD data to define thermal zones. For
advanced users, allows editing of equipment performance curves. Displays a 3D image of the model to help
verify accuracy. Allows simple management of up to 99 design alternatives. Experienced DOE-2 users can
use VisualDOE to create input files, modify them, and run them from within the program. The interface is
designed to be able to incorporate other energy simulation engines like EnergyPlus. A live update program
can be used to check and install latest updates via the internet. Responsive technical support is provided.
Periodic training sessions are available.
1.3.13.9. Weaknesses
VisualDOE implements about 95% of DOE-2.1E functionalities which is adequate for most users.
Advanced users familiar with DOE-2.1E can implement the remaining 5% features by modifying the DOE-2
input files generated by VisualDOE.