Stato dell'arte energetica degli edifici - Automatica - Università degli ...

More documents

Recommendations

Info

SIMEA Stato dell’arte energetica degli edifici 1.2.5. Be06 14 Doc.No 20100610.SIMEA.MR.03 Versione 1 Calculates the energy demand of buildings in relation to the new energy requirements in the 2006 additions to the Danish Building Regulations 1995 implementing the EU EPBD, Energy Performance of Building Directive. Be06 calculations are performed in accordance with the mandatory calculation procedure described in SBi-direction 213: Energy Demand of Buildings (In Danish: SBi-anvisning 213: Bygningers Energibehov). The software uses the mandatory calculation core also developed by the Danish Building Research Institute, SBi. Be06 calculates the expected energy demand to operate the heating and climate conditioning systems in all types of buildings e.g. houses, block of flats, offices, institutions, schools, shops and workshops. The Be06 software calculates the needed energy supply to a building for room heating, ventilation, cooling, hot water and artificial lighting dependent on e.g. building design, building envelope, daylight access, ventilation system, heating installation and energy supply including alternatives as solar heating, solar power and heat pumps. The energy supply needed to the building is compared to the energy frame in the Building Regulations. 1.2.5.1. Validation/Testing Based on European standards (EN and ISO) developed in CEN in relation to the EPBD buildings directive. 1.2.5.2. Expertise Required General knowledge on building envelope and installations are necessary. Basic use of Be06 can be learned in 2-4 hours. 1.2.5.3. Users 1100 users in Denmark 1.2.5.4. Audience Consultant engineers, architects, constructers, builders, energy consultants, local building authorities 1.2.5.5. Input Building envelope areas and U-values, windows size, orientation, thermal characteristics and solar shading, ventilation systems, airing possibilities, daylight conditions, artificial lighting systems cooling system (if installed), heating and domestic hot water system. Input also includes data for the actual energy supply e.g. boiler, district heating, electricity, heat pump, solar heating or power. The data are entered in a standard windows interface. 1.2.5.6. Output There are three types of output: key results, detailed results and model documentation. 1.2.5.7. Computer Platform Windows
SIMEA Stato dell’arte energetica degli edifici 1.2.5.8. Programming Language C++ 1.2.5.9. Strengths 15 Doc.No 20100610.SIMEA.MR.03 Versione 1 Easy calculation of the energy demand for building operation. Check compliance with the energy requirements in the Danish building Regulations. 1.2.5.10. Weaknesses Not appropriate for design and sizing of systems.
Page 1 and 2: Progetto SIMEA: Sistema Integrato/d
Page 3 and 4: SIMEA Stato dell’arte energetica
Page 13: SIMEA Stato dell’arte energetica
Page 65 and 66:
SIMEA Stato dell’arte energetica
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
show all

Stato dell'arte energetica degli edifici - Automatica - Università degli ...

Create successful ePaper yourself

Delete template?

Save as template?