Eliete Pereira - LEPTEN - Universidade Federal de Santa Catarina

REFERÊNCIAS BIBLIOGRÁFICAS 85Fletcher, L.S., Peterson, G.P., Madhusudana, C.B. and Groll, E., 1990,“Constriction Resistance Through Bolted and Riveted Joints,” Journal of Heat Transfer,Vol.112, November 1990, pp. 857-863.Ito, Y., Toyoda, J., Nagata, S., 1979, “Interface Pressure Distribution in Bolt FlangeAssembly”, ASME Journal of Mechanical Design, Vol 101, pp. 330-337.Lee, S., Song, S., Moran, K.P., Yovanovich, M.M., 1993, “Analitycal Modeling ofThermal Resistance in Bolted Joints”, ASME Enhanced Cooling Techniques for ElectronicsApplications, HTD-Vol.263.Macedo, K.A.C., Fernandes, D., Schneider, R.Z., 2001, “Separação entre AlvosNaturais e Construídos em Imagens SAR”, X Simpósio Brasileiro de Sensoriamento Remoto,Foz do Iguaçu.Madhusudana, C.V., Peterson, G.P., and Fletcher, L. S., 1990,”The Effect of NonuniformInterfacial Pressures on the Heat Transfer in Bolted and riveted Joints,” ASMEJournal of Energy Resources Technology, Vol, 112, pp. 174-182.Mantelli, M.B.H., 1995, “Overall thermal Resistance of Bolted Joints: Models WithExperimental Verification”, Ph.D. Thesis, University of Waterloo, Canada.Mantelli, M.B.H., Gonçalves, C. J., 1999, “Thermal Resistance of Parallel Plate-Washer Bolted Joints: Model and Experimental Verification”, AIAA 33 rd ThermophysicsConference, Norfolk, VA.Mantelli, M.B.H., Yovanovich, M. M., 1998, “Compact analytical model for overallthermal resistance of bolted joints,” International Journal of Heat and Mass Transfer, Vol. 41,No. 10, pp. 1255-1266.Marotta, E. E., Fletcher, L. S., June 1998, “Thermal Contact Conductance forAluminum and Stainless Steel Contacts”, 7 th AIAA/ASME Joint Thermophysics and HeatTransfer Conference, AIAA 98- 2758, Albuquerque, NM.Mikic, B. B., 1974 “Thermal Contact Conductance; Theoretical Considerations”,International Journal of Heat and Mass Transfer 17, 205-212.Milanez, F. H., Culham, J.R., Yovanovich, M.M., 2002, “Experimental Study onThermal Contact Conductance of Bead Blasted SS 304 at Ligth Loads”, 40 Th AIAAAerospace Sciences Meeting, Reno, NV.