NAW Jahresbbericht 2010.pdf - DIN Deutsches Institut für Normung ...

9.3 Internationale Normen, Entwürfe und Projekte des NAW
Bezeichnung Akt. Bearb. -
Ausgabe-/
(vorges.) Ersatz
Titel
Stufe
Erscheinungsdatum
NA 119-05-28-10 GUA
dbupr030.rdf /
62610750
2011-04-21
ISO 10467 FDAM 1
50.92
Plastics piping systems for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin; Draft amendment 1
ISO 10639 AMD 1
60.60
2011-02-17
Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Amendment 1
ISO/FDIS 25780
50.20
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -
Pipes with flexible joints intended to be installed using jacking techniques
NA 119-05-37 AA
Vorsitz:
Bearbeiter DIN:
Vorsitz:
Bearbeiter DIN:
Dipl.-Ing. Ulrich Wallmann
Dipl.-Chem. Johanna Bauer
Prof. Dr.-Ing. Volker Wagner
Dipl.-Ing. Hans-Jochen Kropf
ISO 11295
60.60
Classification and information on design of plastics piping systems used for renovation
ISO/DIS 11296-7
40.99
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
ISO 11298-1
60.60
Plastics piping systems for renovation of underground water supply networks - Part 1: General
ISO 11298-3
60.60
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes
ISO/NP 11297-1
10.20
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General
2010-02-25
2010-02-23
2010-02-23
ISO/NP 11297-3
10.20
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes
ISO/TR 11295 1992-08-06
Seite 16