G-Class Owner's Manual - Mercedes G-Class, G-Wagon, G500, G55 ...

Controls in detail
Instrument cluster
You will find a complete overview of the instrument
cluster in the "At a glance" section
( page 18).
1 Reset button
The display in the instrument cluster is activated
when you:
turn the key to position 1 or 2 in the
ignition lock ( page 35)
open the driver's door
press reset button 1
switch on the lights ( page 115)
126
If you open the driver's door and then do
nothing further, the display will only light
up for approximately 30 seconds.
You can change the display in the instrument
cluster using the operating system,
e.g. the language setting ( page 129).
P54.30-6733-31 Risk of accident G
No messages are displayed if the instrument
cluster or the multi-function display has malfunctioned.
You may then not recognise
dangers and endanger yourself or others.
Consult a qualified specialist workshop immediately,
e.g. a Mercedes-Benz Service
Centre, and have the instrument cluster or
multi-function display checked.
Nur fuer internen Gebrauch
Adjusting the instrument lighting
You can adjust the brightness of the instrument
lighting using the reset button located
on the left-hand side of the instrument
cluster.
If the vehicle's exterior lighting is switched
on, the brightness of the buttons on the
centre console is also adjusted.
i
The instrument lighting adjusts itself to
the brightness of the ambient light.