G-Class Owner's Manual - Mercedes G-Class, G-Wagon, G500, G55 ...

Flat tyre
Changing a wheel and fitting the
spare wheel
Risk of accident G
Vehicles with AMG equipment: When fitting
the spare wheel you must observe the following:
the maximum speed of 80 km/h
the specified tyre pressure
Preparing the vehicle
Try to park the vehicle away from traffic
and on a firm, level surface.
Switch on the hazard warning lamps.
Deactivate the automatic door locking
function.
Straighten the wheels and engage the
steering wheel lock.
Apply the parking brake.
Move the selector lever to position P.
If necessary, passengers should leave
the vehicle, ensuring that they are not
endangered as they do so.
Place the warning triangle or warning
lights at a suitable distance. Observe
the legal requirements in all countries
concerned when doing so.
Risk of injury G
The jack is designed only to raise the vehicle
for a short time while a wheel is changed.
Nur fuer internen Gebrauch
Practical advice
Flat tyre
The vehicle must be placed on stands if you
intend to work under it.
Make sure that the jack is placed on a firm
and level surface. Use a stable and non-slip
support plate for the jack if the surface is
soft or loose.
Prepare the vehicle as described.
Do not start the engine while the wheel is
being changed.
Do not lie under the vehicle when it is raised
with the jack. If the vehicle is not raised as
described, it could slip from the jack as a result
of vibrations (e.g. starting the engine,
opening and closing a door or the rear door).
367