G-Class Owner's Manual - Mercedes G-Class, G-Wagon, G500, G55 ...

Controls in detail
Features
Opening/closing the garage door
The integrated remote control adopts the
function of the garage door remote control
once it has been programmed. You should
therefore also read the garage door system
Operating Instructions.
Switch on the ignition.
Press the transmitter button in the
rear-view mirror which you have programmed
to operate this garage door.
242
i
The transmitter transmits a signal all
the time the transmitter button is being
pressed. Transmission is aborted after
a maximum of 20 seconds and indicator
lamp 1 flashes. Press the transmitter
button again if necessary.
Clearing the remote control memory
Switch on the ignition.
Press and hold buttons 2 and 4 for
approximately 20 seconds until indicator
lamp 1 flashes rapidly.
The memory is cleared.
i
Clear the remote control memory before
you sell the vehicle.
Nur fuer internen Gebrauch
Sockets
Socket on the centre console
The socket is located at the rear of the centre
console.
P68.20-3034-31
Raise the cover and insert the plug.