G-Class Owner's Manual - Mercedes G-Class, G-Wagon, G500, G55 ...

Risk of injury G
Only press a transmitter button on the remote
control if there are no people or objects
present within the sweep of the garage door.
People could otherwise be injured as the door
moves.
Programming the remote control
Switch on the ignition.
Press and hold transmitter button 2,
3 or 4 on the integrated remote control.
Indicator lamp 1 starts to flash after a
short while. It flashes approximately
once a second.
i
The indicator lamp flashes as soon as
the first transmitter button is programmed.
If this button has already
been programmed, the indicator lamp
only begins to flash after 20 seconds.
Keep pressing the transmitter button.
Point the transportable garage door remote
control and the transmitter at the
left-hand side of the rear-view mirror.
Press and hold the transmitter button
on the garage door remote control until
indicator lamp 1 flashes several times
each second.
Programming has been successful.
Nur fuer internen Gebrauch
Controls in detail
Features
Release the transmitter button on the
integrated and transportable remote
control.
i
If your garage door opening system
works with a rolling code:
Synchronise the remote control integrated
in the rear-view mirror with the
garage door remote control after programming.
You will find further information in the
garage door opening system operating
instructions, e.g. the sections on "Synchronising
the transmitter" or "Registering
a new transmitter".
241