14.03.2013 Views

G-Class Owner's Manual - Mercedes G-Class, G-Wagon, G500, G55 ...

G-Class Owner's Manual - Mercedes G-Class, G-Wagon, G500, G55 ...

G-Class Owner's Manual - Mercedes G-Class, G-Wagon, G500, G55 ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Operation<br />

Care<br />

The following methods are sufficient if the<br />

soft top is only lightly soiled:<br />

dry cleaning<br />

or<br />

rinsing off with clean water<br />

Do not use:<br />

petrol or diesel<br />

thinner<br />

tar or stain remover<br />

other organic solvents<br />

Frequent cleaning impairs the dirt-repellent<br />

properties of the soft top.<br />

288<br />

Intensive cleaning using MB Cabriolet top<br />

care agents kit can restore these dirt-repellent<br />

properties.<br />

The soft top seams may start to leak either<br />

as a result of ageing or of incorrect care<br />

and cleaning. In this case, have the soft top<br />

seams resealed at a qualified specialist<br />

workshop, e.g. a <strong>Mercedes</strong>-Benz Service<br />

Centre.<br />

i<br />

Cover the soft top with a suitable cover<br />

if you are leaving the vehicle parked in<br />

the open for any length of time.<br />

Nur fuer internen Gebrauch<br />

Cleaning the windscreen and wiper<br />

blades<br />

Make sure that the windscreen wipers<br />

are switched off ( page 41).<br />

Risk of injury G<br />

Remove the key from the ignition lock before<br />

cleaning the windscreen or the wiper<br />

blades. The windscreen wipers could otherwise<br />

be set in motion and injure you.<br />

Fold the wiper arms away from the<br />

windscreen until you feel them engage.<br />

You can now clean the windscreen and<br />

wiper blades.<br />

Fold the windscreen wipers back before<br />

turning the key in the ignition lock.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!